Our power transformer kit is designed to fit inside a 1u rack case height. Dual winding primaries mean this power transformer can be used for 110VAC or 220VAC operation. All the necessary hardware, including rubber mats and a mounting bolt and end cap are included with the transformer. A standard size IEC AC inlet, fuse holder and fuse, a power switch and LED power lamp is also included.
Dual Primaries: 115V + 115V. Frequency: 50/60 Hz. (can be used for 110VAC or 220VAC operation)
High pot: tested at 4K VRMS
Dual secondaries. Secondary voltage tolerance: Within 3% at normal input and full load
Mounting hardware: Metal dish, 2 foam pads, bolt, washer, and nut included with each transformer
Leads: 150 mm / 6" (±5 mm / .2") stranded, PVC insulated
Double-insulated primary leads: UL1672 (105º C, 300 V)
Secondary leads: UL3266 (125º C, 300 V)
Clearance: allow 4 mm / .2" over mounting hardware.
Certifications: UL506/CSA 22.2, No. 66; CE marked and tested in accordance with EN61558 (replacing EN60742), EN60065, EN60950, BS415, VDE0550. Also available: UL1411/CSA 22.2 No. 1-94; UL1950/CSA 22.2 No. 950-95; UL2601 (UL544)/CSA 22.2 No. 601.1.
Includes IEC AC inlet
Includes Fuse Holder and Fuse
Includes Power Switch and LED Lamp indicator (standard LED)
